Contact Us

Should you have any enquiries or need some help sourcing a product, please do not hesitate to contact our Sales Department:

 
powered by fox contact

BRAU6080 X-Ray Baggage Scanner

Email
Rating: Not Rated Yet
Description

Intended Use

The Braun BRAU6080 is especially designed for the visual inspection of check-in rolling baggage, handbags, boxes and parcels without opening them.

The Braun BRAU6080 is provided with dual energy features, threat detection algorithms, adjustable density alert function, enhanced archive and TIP features. An ergonomic workstation with operator console provides ease-of use operation.

The Braun BRAU6080 allows identification of weapons, explosives (including plastic explosives), drugs, primers and dangerous objects, which are safety hazard.

Configuration

Device body
Frame
Conveyor
Inspection tunnel
Distribution panel

Digital X-ray image receiver
X-ray sensitive digital detector
Electronic interface unit

X-ray unit
X-ray generator
Collimator

Other
Operator's workstation
Set of control programs
Set of spare parts, tools and accessories
TIP software package
Operational documentation
Packaging

Options
Exit / entry rollers
Operator's desk
Set of test objects
Ramp

Key features
Multi-functionality
Low position of conveyor
Adjustable warning about high density objects

Technical Data

Conveyor Belt
Maximum distributed load on the conveyor belt, kg, max: 180
Conveyor speed, m / s: 0,22±0,03

Digital X-ray Image Detector
Type of x-ray sensitive element: multiunit array
Number of detection elements in array: solid-state photodiode with scintillation coating
Wire detectability (minimum diameter of copper wire/standard operating mode) mm: 1664
Steel penetration, standard operation mode, mm: 27
Steel penetration, high penetration mode, mm: 30

X-ray unit
Anode voltage, kV
- Standard operating mode: 140
- High penetration mode: 160
Angle of radiation: 60°
Cooling system: Oil bath
Anode type: Stationary

Physical Parameters
Tunnel dimensions, mm
- Width: 610±3
- Height: 810±5

Overall dimensions, not more than, mm
- Width: 1280
- Height: 1300
- Length: 3030
Weight of scanner, kg, no more than: 800

Software Features

The purpose of the system software is to control the operation of the Scanner as well as to provide the opportunity to acquire, visualise and process digital X-ray images. To facilitate the work of the operator, a control panel is provided. The panel makes it possible to access all the software features.

GENERAL PURPOSE FUNCTIONS:
· Password-protected logon.

SELF-TESTING AND PERFORMANCE SUPPORT FUNCTIONS:
· Automatic self-testing;
· Displaying messages about operating status of the Scanner;
· Warming up the X-ray generator (the process can be started both manually and automatically).

HARDWARE CONTROL FUNCTIONS:
· Controlling the conveyor belt drive, the protective shutter's drive, the X-ray generator;
· Automatic changing of generator's operating modes depending on the scanner idle time;
· Acquiring data from the X-ray detector;
· Automatically calibrating the X-ray detector;
· Turning off the X-ray generator in case of emergency;
· Indicating X-ray on.

DIGITAL X-RAY IMAGE ACQUISITION, VISUALISATION, AND PROCESSING FUNCTIONS:
· Acquiring images without additional algorithmic processing;
· Highlighting optically dense objects;
· Adjusting contrast of strongly absorbing objects;
· Inverting images;
· Performing gamma–correction of images;
· Optimising the overall contrast: combination of edge enhancement and local contrast enhancement algorithms;
· Colouring images according to calculated values of atomic numbers of substances which com pose objects under inspection;
· Colouring substances with atomic numbers from a selected range;
· Pseudocolouring objects with a possibility of selection of various palettes;
· Displaying organic objects with atomic numbers equal to 7, 8, and 9;
· Displaying substances according to a selected range of signal strength;
· Magnifying one out of nine predefined areas of an image;
· Zooming images up to 96x;
· Automatically highlighting suspicious objects (which can be related to drugs, explosives, or arms).

ADDITIONAL FUNCTIONS:
· Saving X-ray images to files;
· Storing a predefined number of images;
· Browsing the image archive;
· Copying images on external storage media (CD/DVD disks and flash-drives);
· Viewing and copying images from a local area network;
· Automatic preparing, filing and printing service reports;
· Controlling quality of operator's performance with the TIP program module;
· Counting inspected baggage.






 





Social Media

FacebookTwitter

Contact Us

Phone: +44 (0)1652 632273

Fax: +44 (0)1652 633399

Email: sales@braunmedical.co.uk