Contact Us

Should you have any enquiries or need some help sourcing a product, please do not hesitate to contact our Sales Department:

 
I agree to the website Terms and Conditions and the Privacy Policy (links can be found at the foot of the page). I also agree to be contacted in relation to this query.
I agree to receive marketing emails from Braun and Company. Please note that your details will not be shared with any third party.
powered by fox contact

Anaesthesia System Encore 755

Email
Rating: Not Rated Yet
Description

1.0621 Encore 755 Anaesthetia System

1.0621 Encore 755 Anaesthetia System

Features

5.7″TFT colour LCD screen, 640x480 pixels

2 x drawers 200x392x398mm (HxWxD) *NEW "soft close"

Suitable for paediatric & adult use

Integrated absorber system with heating function, bypass design, easy assembly, autoclavable

Audiovisual alarms

Built-in battery

Built in expiratory PEEP valve

Gas supply: O2, N2O, Air

Dimensions (HxWxD): 1410x950x650mm, 110Kg

Maximum load on top: 30kg

Electrical Specification

Mains: 100-240V AC. 50Hz/60Hz

Battery type: NiMH 12V DC

Battery minimum supply time: 4 hours

Battery charge time: 4 hours

3 auxiliary output power interface

Flowmeter

6 tubes flowmeter

0.05~10 l/min

Gas system:

Hypoxic guard system

O2 flush

Ventilator

Patient type: Adult & Paediatric

Ventilation modes: VCV, Manual, Standby (PCV Optional)

Tidal volume: 50~1500ml

 

Respiratory System

Absorber Canister Capacity: About 1,500ml

Connection: Inhalation/Exhalation ports: standard OD 22mm, ID 15mm; tapered connector

Manual breathing bladder port: standard OD 22mm

System leak: <140ml/min

Respiratory system resistance: Inspiratory/expiratory: <0.6kPa

Parameters Setting

Tidal volume: Range 50-1,500ml

Tidal Volume Increment: 50~100ml: 5ml; 100~1,500ml: 10ml

Respiratory rate: Range:1~100bpm; increment: 1bpm

Inspiratory time: Range: 0.1~10.0s; increment: 0.1s

Respiratory ratio: Range: 4:1 to 1:10; increments: 0.5

Percentage of inspiratory pause: Range: 0 to 50%; increment: 5%

PEEP: Range: OFF, 3~30cmH2O; increment: 1cmH2O

Pressure Support: Range: 0~70cmH2O; increment: 1cmH2O

Pressure Control: Range: 5~70cmH2O; increment: 1cmH2O

Flow trigger: Range: 0.5~20l/min; increment: 0.1l/min

Pressure trigger: Range: 0~20cmH2O; increment: 0.1cmH2O

Monitoring Parameters

Inspiratory tidal volume: 0~2,500ml

Expiratory tidal volume: 0~2,500ml

Minute volume: 0~60 l/min

Spont minute volume: 0~60 l/min

Respiratory rate: 0~100bpm

Spontaneous breathing frequency: 0~100bpm

Respiratory ratio: 30:1 to 1:150

Peak airway pressure: 0~100cmH2O

Mean airway pressure: : 0~100cmH2O

PEEP: 0~100cmH2O

Inspiratory plateau pressure: 0~100cmH2O

FiO2 (optional): 15 to 100%

Compliance: 0~300 ml/cmH2O

Airway resistance: 0~600cmH2O / (L/S)

EtCO2 (optional): 0~100mmHg

Alarm

 MV, Paw, Continuous Paw high, Vte, Rate, FiO2, Mains failure, Battery low, Battery discharged, Gas supply failure, O2 supply failure, Apnoea

Tidal volume: High: 30~2,000ml, OFF; Low: 20~1,500ml

Minute ventilation: High: 1~99l; Low: 0~98l

Respiratory rate: High: 1~100bpm; Low: 0~99bpm

FiO2 (optional): High: 22~100% OFF; Low: 20~99%

Airway pressure: High: 10~99cmH2O; Low: 1~98cmH2O

Continuous positive airway pressure

Negative pressure alarm: Airway pressure is less than –10cmH2O

Oxygen deficiency alarm: Oxygen pressure is less than 0.28MPa; alarm sound pressure level of not less than 60dB

Alarm mute: ≤120s

Inhaled oxygen concentration <18%: FiO2<18% Vol

Measurement

Pressure values: Pmin, Ppeak, Pplat, Pmean, PEEP

Volume/Flow values: MV, Vti, Vte, MVspn

Loops: Pressure-Volume, Volume-Flow

FiO2, f, fspn, Rst, Cdyn

Waveform: Paw, Flow, Volume 

 

 

 

 

Social Media

FacebookTwitter

Contact Us

Phone: +44 (0)1652 632273

Fax: +44 (0)1652 633399

Email: sales@braunmedical.co.uk