It is equipped with all safety systems and brakes.
TECHNICAL SPECIFICATIONS
GENERATOR 150 mA—125 KV
Comprising of:-
Electronic control desk. Tension continuous adjustment from 40 to 125 KV. SCR electronic timer with times from 0,01 to 5 secs. mA selection in 5 steps: 25-50-75-100-150 mA. Automatic line compensation of small variations Rotating anode starting device with relevant safety. Max load device for X-Ray tube safety. Focus automatic commutation. Filament safety. SCR safety. Display of preset mAs. Reading of measures on display. Possibility of connection with 1 potter or accessory. Manual and remote controlled exposure control. Power supply: 220V—50 Hz Generator H.T. Single Phase H.T. generator insulated in dielectric oil, max performance 125 KV With 150 mA. Silicium diodes in H.T. for double half-way operation. Tube connection: up to 1 and 2 focal spot with H.T. outputs type federal.
X-RAY TANK GENERATOR 100 mA - 110 KV
Insulated in dielectric oil.
Silicium diodes in H.T. for double half way operation.
Fixed anode X-ray tube 110 KV max, focus 0.6 x 1.8mm.
Performances on large focus: 30 mA at 110 KV/ 50 mA at 110 KV/ 80 mA at 80 KV/100 mA at 65 KV; on small focus: 8 mA at 110KV.
ELECTRONIC CONTROL DESK
Tension continuous adjustment from 40 to 110 Kv.
SCR electronic timer with times from 0.01 to 5 secs., 32 steps.
5 current values: 8 mA on small focus.
30-50-80-100 mA on large focus with automatic focus commutation.
Max loads safety.
Filament safety.
SCR safety.
Automatic compensation of power supply variations.
Display of preset mAs.
Reading of measures on display.
Possibility of connection with one potter or accessory.
Manual and remote controlled exposure control.
Power supply: 220V—50 Hz.
THE COLLIMATOR enclosure is constructed of double steel walls for maximum X-ray protection. Two pairs of lead shutters, controlled by means of two knobs, limit the X-ray field size. A lead Cone, situated near the X-ray anode, reduces the off focus radiations.